Bend hand with puppet warp tool to form a foot. select an area around the finger nails to form toes and copy and paste than invert. see figure 4 for example.
step 5 of 13
Use puppet warp to make the chain straight. and start linking together.
step 6 of 13
Cut out wrist area from statue and stretch it a little bit. this will be used later for several different things.
step 7 of 13
Join the wrist and foot to the chain links.
step 8 of 13
Put all together in a V shape. Join the links at a midway point to go back from hands to the feet
step 9 of 13
Cut off a section of the slab to make a table top and use the curves RGB to the red to get a red tint to the stone to make it look like a hunk of meat (that is the best example I could think of).
step 10 of 13
place the chained hand with arm and foot with leg over the red slab of rock. use puppet tool to get to look like they are attached.
step 11 of 13
Take the wrist piece from step 6 and blend to look like it is burnt and stretch it out to form a roller. > Make a copy and stretch out out to the size of the work area to look like the burning coals of a forge. > Use the chain attached to the wrist 3 copies at a 90 degree and stretch to length of area. > take the roller piece 9 copies to lay across the chains.
step 12 of 13
Take the Red stone Colossus block to be formed on forge area with the chain and rollers and place 3 copies there to link up.> place a black stud to hold the chains in place. (stud is cut from tip of roller and puppet warped to shape of an nail head).
step 13 of 13
I used the green backing so it will be easy see the pieces I cut out and formed. Parts is Parts.