A Work in Progress: Gamma Blaster 500



This guide was made for entry:
Gamma Blaster 500
In Contest:
old but loved


Original image


step 1 of 12

My photo. I couldn't find a suitable box image and remembered this makeup case that I had, perfect to sit on my leather wingback chair.

Creation of Gamma Blaster 500: Step 1

step 2 of 12

Partially extracted bike.

Creation of Gamma Blaster 500: Step 2

step 3 of 12

Wheel fork and pipes, made with multiples of original from bike.

Creation of Gamma Blaster 500: Step 3

step 4 of 12

Steel triangles. I changed the angle of the one smaller piece on the right side (select>transform).

Creation of Gamma Blaster 500: Step 4

step 5 of 12

Pipe for edges (one cut out, duped twice and warped) and 'trigger'.

Creation of Gamma Blaster 500: Step 5

step 6 of 12

Seat and cover plate added.

Creation of Gamma Blaster 500: Step 6

step 7 of 12

Light, barrel shield added.

Creation of Gamma Blaster 500: Step 7

step 8 of 12

Inside barrel color and sight scopes added.

Creation of Gamma Blaster 500: Step 8

step 9 of 12

Red shape on multiply.

Creation of Gamma Blaster 500: Step 9

step 10 of 12

Clip fabric to shape, hue-sat adjustment.

Creation of Gamma Blaster 500: Step 10

step 11 of 12

Create name tag.

Creation of Gamma Blaster 500: Step 11

step 12 of 12

Warp the tag into position. Changed the font, but the technique is the same.

Basic chopping with lots of warping throughout and some masking and layer adjustments.

Creation of Gamma Blaster 500: Step 12

Final result

Creation of Gamma Blaster 500: Final Result

LOGIN or REGISTER FOR FREE
to rate this guide and create your own guides.

Votes


uservoted
EmeraldStormcloud
Score:
10